-
A unique gas discharge tube (GDT) and metal
oxide varistor (MOV) hybrid circuit that allows minimum let
through energy to go to the connected equipment
-
6 surge protected sockets for sensitive
electronics
-
Protection for all interface connections
-- AC, DSL/Telco, Ethernet/USB and coax
-
The highest surge energy absorbing capacity
without failing open and leaving connected equipment unprotected
-
A surge protection capability that exceeds
the maximum energy level recommended by IEEE
-
No leakage current allowed to pass through
to MOVs ensures a long and dependable service life
-
Lowest steady state clamping voltage compared
with all devices on the market
-
Does not attract lightning induced surges
into the home like the ordinary MOV based surge protection
equipment – gas tube serves as a voltage controlled
electronic switch and turns on when needed.
-
No degradation of MOV due to patented circuit
design
-
Continuous protection -- even when connected
loads are not turned on
-
Individual ground present/absent indicators
alert user of improper wiring or grounding connection
-
A short length power cord, which creates
least resistance path to ground for the best overall surge
protection performance.
-
Lighted switch indicates when AC power
is available at the outlets.
-
Low capacitance circuit components to preserve
the integrity of incoming signals
-
AC receptacles spaced apart enough to accept
up to six step down transformers or DC converters
-
Balanced surge protection circuits for
DSL/Telco port connection prohibit any common mode surge energy
from reaching connected equipment
-
Listed to UL1449
